The OptiClimate 15000 PRO3 Inverter Split air-cooled has a cooling capacity of 15kW and has 3x2700W heating elements.
Read more...
| Article number: | 1-2012 |
| The OptiClimate 15000 PRO3 Inverter Split air-cooled has a cooling capacity of 15kW and has 3x2700W heating elements. |
Download product manual (EN):
|
The the OptiClimate 15000 PRO3 can cover a distance of up to 15 meters between the outdoor unit and the indoor unit. The OptiClimate Split is provided with a set of two 8-meter refrigerant hoses. If a longer hose is required, it can be ordered up to a maximum of 15 meters. For example, if 15 meters of hose are required, this hose should be ordered 7 times (for an extra 7 meters).
Inverter technology allows a constant adjustment of the temperature and humidity of the air. Thanks to the Inverter, the OptiClimate can adjust the temperature continuously, without jumps, to keep it at the desired value.
The OptiClimate Inverter responds immediately as soon as it detects a minimal difference between the set temperature and the actual temperature. Inverter technology prevents the compressor from turning on and off again and again, thus preventing current peaks. In addition, the OptiClimate Inverter consumes less water and energy and maintains more uniform temperature and humidity values. On the other hand, this technology has a system of "soft start", the compressor is revolutionized progressively and, thus, a high starting current is avoided.
The OptiClimate Inverter has the peculiarity of being multiphase, that is to say, that the compressor can be connected to a single-phase system of 230-240V as well as to a three-phase of 400V. The variant with Inverter is available on all 15,000 models.
* In two and three phase connections connect one heater per phase
** With a humidity of 80% in the air and an ambient temperature of 30ºC
